I get quite a few questions about spray paint, and I thought the most useful way for all of my readers would be to answer those questions publicly. So here it goes.
Why do you use spray paint!?!
I choose to use spray paint because I want my furniture to look like I bought it from a store instead of a refinishing project gone array. I have learned this the hard way. I have a lot of gallons of paint, and believe me, it is TEMPTING to use those. But, I have come to the conclusion that spray paint leaves a much more professional finish than brushing the paint on. I have brushed it on before….a LOT….I don’t do it anymore. Not even occasionally. Spray painting is much more time effective and my furniture ends up looking store bought.
Sidenote: If I had a super nice paint sprayer…I would definitely try using gallon paint, but brushing paint onto projects is long in my past. I hate the brush marks it leaves.
It is “thrifty-er” (is that even a word?…I think I made it up) to brush paint on because of the price of the spray paint. Why do you waste money on spray paint?
In my opinion this is a HUGE “no way” because for me time is money. Brushing paint on takes hours…ok lets be honest…DAYS. For me, I do projects all the time. If I had to wait for a project to dry several hours between coats instead of 10 minutes I would go crazy, and would get 5% of the projects done that I started. I simply use spray paint because of the time efficiency and the professional finish like I discussed above.
Why do you use Krylon? Do you suggest any other brands?
I use Krylon spray paint because of the nozzle. Their nozzle is by far the best in my opinion. Have I used other brands? Yes, I have. In fact I still do sometimes when Krylon doesn’t have the right color that I’m looking for. But, you have to have a “play it by ear” attitude when dealing with other brands. They tend to dry slower than Krylon, and sometimes they don’t coat as well. DO NOT BUY THE CHEAP $1.00 a can stuff. You will end up spending more money than if you buy less of the more expensive stuff. (Speaking from experience here). I have bought Rust-oleum Painter’s Touch 2X coverage on several occasions and have had a good experience.
What sheen of spray paint should I buy?
I always buy gloss (not high gloss). I’ve had a lot of people wonder if their project is going to look too shiny when they get done. In my opinion, after you prime your project with KILZ, the sheen will not look overly glossy. I know that sounds weird, but that is what I have found. My projects seem to always end up looking more like a satin finish when they get done. PLUS, I want to be able to wipe off a project if my kids spill anything on them. If you use flat paint, you will not be able to wipe it off (again speaking from experience here).
Do you always prime your projects?
Yes, in fact, I would say 95% of the time I prime my projects. I have found that the KILZ spray paint primer is by far the best. If you prime your project, the KILZ will seal it. It will help your project to have a better sheen and finish as a result.
Why does KILZ spray primer leave a sand-papery finish sometimes?
I’m not sure. I have had several people tell me that if you shake the can for longer than two minutes than the sand papery finish doesn’t happen. I just take a high grit sand paper (220 grit) after I have primed a project and hand sand it quickly. It takes it right off very quickly.
I painted a project and the paint didn’t stick, do you know why?
Number 1: did you prime it? Number 2: was it metal or plastic, or some sort of material that the spray paint can did not say it was ok to paint it with? I bet it was either of these reasons…maybe both that made your paint so fragile and peel off.
Why do some colors cover better than others?
I wish I had a magic answer for this one. But, what I have found is that some colors are simply more translucent than others. A few of the translucent colors I have used are RED, NAVY BLUE, LIME GREEN, and ORANGE. These colors are going to need a LOT more coats than some of the more covering colors like: Ivory, Black, Blue Ocean Breeze (Krylon), Smoke Gray (Krylon), White, and Bauhaus Gold (Krylon). So, if you are painting a project with the more translucent colors described above, plan to buy at least twice as much paint.
After spraying a project do you seal it with a polyurethane after?
I have only done this on a few occasions. It simply depends if I think it needs to be protected. For example on all the dining room tables I have redone, I have sealed the top. I have used a poly-acrylic (or polycrylic I’ve seen it called both) because it is water based instead of oil based. This protects the projects that will have constant use and wear. Buy a small can of the polycrylic and buy a specific application tool sold specifically for it (a cloth or brush). Just make sure that you follow the directions (on the bottle) on how to apply it.
How do you prevent the spray paint from dripping?
I use thin coats of spray paint and try hard not to get too much paint on the project. If you spray too much, this will cause it to drip. Check out the video found in my painting 101 post, and you will see the technique I use to spray paint. I am not perfect, and sometimes I have a drip here and there. I simply sand it off with a high grit sand paper and put another few coats of the spray paint to cover it.
How do you prevent your projects from looking stripey?
The project will look stripey while you add the coats of spray paint. Keep spraying coats until the stripey look disappears. I think the best bit of advice here is to make sure you have enough spray paint to cover the entire project completely. Make sure you start your spraying off the project and continue across and end off the other side, then continue back across until you go back off the project. Your painting will look better if you do it this way. Glazing a project is also a great way to hide stripes. 
How do you spray paint in your garage? Doesn’t this cause over spray to get all over your garage?
Spraying in my garage is the only way I can do projects during certain times of the year, and I try hard to make sure the entire area is covered with a drop cloth or plastic. BUT…sometimes the over spray covers the floor and items that are near. So, make sure your car and items that you don’t want dusted with over spray are not near by. I’m lucky to have a pretty large garage, so I have plenty of room for projects.
What do you use to spray your projects on outside?
I use old carpet remnants to spray most of my projects on. I sometimes use paint drop clothes, but I’ve found that if I’m spray painting on the side of my house (in the rocks) my projects are more stable if I use carpet.
Have you ever gotten a can of paint that does not have enough pressure to spray properly?
Yes, it drives me crazy when this happens. I take it back to the store and ask for an exchange. They will only do this if the can is mostly full, so don’t keep trying to use it if it is defective.
Does it hurt your hand or finger after spraying a large project?
Yes, in fact, it hurts pretty darn bad after you have held a spray paint can in spraying position for several hours. So, I have found that buying the store-bought triggers (that clip to the top of the can) can be helpful. Other than that, I’m not sure if there is a magic solution to this one either. I have just learned to be tough and grit my teeth.
Update 11/11/10
Why does spray paint bubble at times?
I have been getting this question a lot lately. I can only guess why the paint is bubbling based on why it has bubbled for me in the past. These are the reasons why I have had problems with this in my experience:
1. It is too cold. You need to spray paint between about 60 degrees and 85 degrees. Especially if it is “freezing” weather, your paint could literally freeze when it hits the cold air. I have seen this on many occasions.
2. It is too hot. If the weather is too hot, then the paint tends to dry too fast. If this is the case, it can bubble up also. Do not spray paint directly in the beating sun (especially in the summer) or your paint will bubble right up.
3. Your coats are too thick. If there is too much paint on the furniture, when it dries, it will cause it to bubble.
4. You are using a “cheap” spray paint (around $1.00 a can). This type of spray paint is much more apt to bubble.
What do I do if the paint bubbles?
Do NOT panic! Simply get a high grit sand paper (220) and lightly sand the bubbling after it is dry, and go over the area again with paint (no need to prime again).
Can you spray paint in extreme weather temperatures?
In my experience as described above in the bubbling section, it is best if you spray in an environment that is between 60-85 degrees. I don’t have this luxury a lot because of the climate I live in. In the summer, it can get to 120 degrees outside. The winter is much milder, but I have to have a “play it by ear” mentality with this. I still do projects in the garage in the winter, and I still spray paint in hot weather. I just stand the risk of the paint bubbling if I choose to spray paint outside of my recommended degree allotment.
How do you protect your lungs from the spray paint?
I always spray in a well ventilated area, and I hold my breath. I have tried masks in the past, but they drive me crazy. I try to spray paint outside in the fresh air as much as the weather allows.
Where do you buy your spray paint?
I buy as much as possible at Wal-Mart because the price is the best. Do NOT buy a can of spray paint at a craft store for $8.99 a can. Holy cow…that is a major RIP off. Krylon spray paint is $3.47 at my local Wal-Mart. Home Depot will also meet and beat competitor’s prices, so I often get KILZ spray primer there so I can save a bit of money since I buy a lot of it.
I’ll keep adding to this post if other items come up, but these are the most common questions I get on a daily basis. The main thing I’d suggest, is that you will get better at spraying your projects with practice. Practice helps you to experience the same problems that I have come across, and you will soon be an expert also!
I am unsure of the original source of this photo. If anyone knows, please let me know in the comments below!
GOOD LUCK AND HAPPY SPRAY-PAINTING!!
Thanks…this is very helpful! I just have one more Q. Have you ever tried to spray paint over a veneer finish? Does it work, or would the paint just peel off since it's shiny?
I realize this is 3 years later than your original question but I’m about to spraypaint a veneer piece and am wondering the same thing….did yours work out?
YES! It works great as long as you prime first with KILZ, sand with 220 after the primer is dry, and then spray paint after that! Good luck!
Thanks! I do most of my furniture painting with a brush. But have been moving towards spray paint – just chairs at the moments.
Mary Ellen
Thanks for these tips. I'm just now starting to use spray paint so it's nice to have a little "inside" knowledge!
You're awesome, Brooke! I've got spray painting on my list of stuff to do today. My husband and I LOVE the Rust-oleum Painters Touch 2X coverage you mentioned. I just wish it came in more colors!
Brooke, I'm starting a project today and am loving your spray paint tips!
xoxoxo
I'd like to know if you have any suggestions for safety when using spray paint. In the spring I did several projects on consecutive days, using a mask each time, but my chest/lungs started to feel strange. I haven't done any spray painting since. I'm concerned that I could damage my health. Any thoughts?
Thank you, thank you! These tips are super helpful.
Love your site! I have a metal lamp base I want to spray paint–any tips on the type of paint to use or something I need to do to prep it first? This will be my first ever project, so I'm a total newbie to this.
These are great tips! I do like the even finish spray paint can provide. But once in awhile, I kinda like seeing brushmarks for a more cottage-y look.
I have the same question as Karen – what do you do for safety? Do you wear a mask etc?
I love all the tips because I have been painting a new table and chairs and reupholstering and these are some of the best answers and well needed…Don't worry pictures to come soon!
What a great post! Thank you for all the tips.
Awesome tips! I'm sure this will help lots of first timers or even ones who need a refresher on painting! I learned some new things too!
Oh, and as for polyurethane- did you know you can buy it really cheap at the restore place? I got a gallon can for $15 which is how much a pint usually is and it was nice kind that didn't smell much at all, which was nice after doing our table top and immediately putting it into our house! Anyone who has one of those in their city HAS to check them out! They are so worth it! Love the Restore!
I have been wanting to spray paint my washer and dryer a butter yellow color. I bought Rust-oleum brand Painters Touch, but am nervous to use it. Do I need some sort of special appliance paint because of the slick metal?
Thanks for the tips. Im about to spray paint a dresser and was thinking about brush painting it but now you have helped me to decide. Love your site!! Always helpful, Great ideas, and always inspiring! Keep up the good work.
What kind of polycrylic do you use to seal your tables? Im going to be refinsihing mine soon so it would be good to know what kinds work. Thanks
Hi- I love your site and read it all the time. I have just refinished a cabinet and want to do some glazing over the details. I've seen your 101 and have even tried it but I can't get mine to look as nice as yours. Do you need to wipe only in one direction? Should I use just a touch of glaze or a ton? Do I need a clean bit or rag for each wipe or does it matter? Really I'm mostly concerened about it looking like my 3 year old did it instead of a professional, so any advice would be awesome!!
Ha! I forgot to include my email. aparker5@gmail.com. Thanks again!
Brooke – love the tips! I always follow your advice
Have you ever spayed anything glass or ceramic?? I have a lamp I'd love to re-do but nervous about if spray paint will stick?? Thanks, you are da bomb!
What would you suggest if the spray paint doesn't come in the color you need?
I'm new to the spray painting thing, and I bought one of those cheapy triggers..big mistake, it just caught paint and dripped it all over my project! Love your tips though!
Does polycrylic come in a spray or do you have to brush it on?
These were the most helpful and genuine spray painting answers one can get from a pro like you.. I am thinking of spray painting sth myself now..
feeling more conofident.. thinking i might be able to pull it off..
This comment has been removed by the author.
Brooke- have you ever had a problem with paint crackling? I am working on a headboard bought on Craigslist (think it has been painted several times) and it continues to crack in spots. Help!
Thank for all the great posts! We love you!!!
Great tips. Thanks for compiling this info!
Sorry, I thought of a question for you! Where do you like to buy your spray paint? Home Depot doesn't have Kryon, craft stores are too expensive and Walmart doesn't seem to have all the colors?! Where do you go?
i am wondering the same thing as natalie above….where do you buy your krylon colors?? i am looking for bauhaus gold and can't find it!! thanks for all your tips. i am about to try to conquer a spray painting project right now!
merrantatum@gmail.com
Hi
I have an answer to why some colors cover better than others. It is because of the size of the colorant molecules. Red and bright yellow have large molecules allowing more space to show through and more coats needed. Blue and black and white have small molecules and therefore less space. You can always prime in a similar color to cut down on all the coats.
Love your post!
Hi,
I have a question about primer. I tried to do my own artwork and I am not happy with the colors. I painted on canvas using acrylic paint. Can I use primer to cover it and start over?
Brooke I love your blog. I'm also from St. George and love to re-invent the old stuff! Whenever I have someone ask about paint, I send them a link to this great info on spraypaint. Thanks for sharing all your great ideas! Sharley doubletakedecor.blogspot.com
I just wanted to stop by and let you know that I linked to this post today from the new Home & Garden channel at Craft Gossip.
My hope is to share many of the fabulous projects I see everyday with the vast CG audience. I hope you will not only stop by and subscribe to CG, but will tell your friends about the new category! Hope you see some traffic from it!
Your feature will appear in the main Craft Gossip RSS feed, on the main home page and can be found directly here
http://homeandgarden.craftgossip.com/tips-for-using-spray-paint/
If you would like a "featured by" button, you can grab one here!
http://homeandgarden.craftgossip.com/grab-a-craft-gossip-button/
I love your blog and have done several projects that you have featured. Thanks for the spray painting tips 101, they are very helpful, but one Q I have is, have you ever spray painted metal door handles? If so do you have any tips on what the best way is of doing it? Please email me back when possible at robynjsdesigns@gmail.com
Thanks so MUCH for this tutorial! I loved it. I LOVE this blog! You do absolutely AMAZING work. I love reading your friendly and EASY-TO-FOLLOW posts! I will definitely begin spread the word to my friends! Thanks again!!
P.S. — I meant to ask you, Can you spray paint a veneer finish? I bought a little end table yesterday to try your tips out on, and wasn't sure if veneer will cause problems or not. (also, any suggestions on where to find more color choices from Krylon or Rustoleum?) my email is kinjulie@gmail.com. THANKS~
Is there a temperature that is too low for spray painting? I have a dresser that I'm trying to finish, but it keeps crackling it spots and I had to sand it down and start over so I needed to know if it's crackling because it's too cold. My email is zerd46@hotmail.com THanks a lot! I love this website!
Wow thank you for all of this information. I'm just getting into the spray painting area, but not on furniture, on smaller unfinished wood pieces I turn into mixed media art.
I didn't know there were things to keep the spray going to save your finger a little bit. I hate that pain you get after spraying a while.
Thanks again!
Elexa
http://www.gptally.blogspot.com
Hi! Another question….Is spray paint ok for a crib? I want to repaint a crib in the next weekend or two…just wondering/
What a great post! I'm literally heading out the door to buy my first spray paint. I have an old, fairly ugly tall candle stick that I'd love to paint white. Your tips will definitely come in handy today! Thanks so much.
Same question as someone above . . . I want to refinish a used crib I have but I want to make sure spray paint is safe. I could paint the crib in a week or two and then still have about 3 months until I have my baby. Thoughts?
I just finished painting a 6 foot dresser! It took about 6 cans of Krylon to cover the whole thing! I primed with Kilz and sanded with 220 before I painted it and now that it's dry, it feels gritty.
If I sand and paint it again, won't it just be gritty again? I'm confused and discouraged. Can you help?
To answer the questions above about painting a crib. Yes, I would paint a crib. Do I consider myself the absolute expert about this? Nope. But, I would paint a crib if it were me, in fact I have touched up my black crib several times.
Amber,
Just sand it lightly to remove the gritty feel. If you don't push too hard, you will remove the grit and not much of the paint. After you sand it, wash it off with a wet wash cloth, wait for it to dry and if it needs another coat of paint at that point, spray it one more time. That should work.
Brooke,
Your blog is so informative I'm now ready to try spray paint thanks to you
I have been inspired by your site to paint and I have had so much fun and made a lot of things in my house look so much better. My husband, family and friends are so impressed. Getting the right weather is a challenge. My brother bought me the trigger thing that pops on the top of the can. This has saved my hands from being permanently cramped.
What a great tutorial! I think you've covered everything. I'm your newest follower~
I am getting ready to spray paint a large piece of furniture (very large dresser). On your big projects about how many cans of paint do you use?
With the translucent colors you may want to try painting it white first. Not sure if it would work the same with spray paint, but I have to do that with acrylic paint a lot, and it takers fewer coats & covers better that way. Worth a try!
I think I'm addicted to spray painting – your tips were REALLY helpful!
Thanks
Rosie
Thank for this! I was feeling super guilty buying the spray instead of gallon paint so this makes me feel better
So glad I found this! Do you have any pointers or tips on painting IKEA furniture? I want to paint a black-brown Hemnes 8 drawer dresser (64" wide!) into a navy-ish color or something appropriate for a little boy's room. It will be my first spray painting attempt! Any tips? Or suggestions on colors? Or idea how much paint to buy?! THANKS!!
THANKS!!
Lightly sand it with 220 grit sand paper before you begin to make sure the spray paint will adhere. Don't forget to prime. As for the Navy…you are going to need A LOT of paint. I have painted Navy before and we went back to the store twice because it doesn't cover very well. I would probably prime with Gray rustoleum primer if it were me since you are painting it a dark color. Good luck!
This is exactly the wealth of knowledge I have been looking for! You're amazing! Thank you!
Hi just wanted throw a few things out there on "Why does spray paint bubble at times?" I dont actually know at all about spray canning furniture – but will hopefully in future. But in my experience of automotive refinishing and airbrushing i would think that the bubbles could be a similar reactions to> 1. previous contaminants on the surface comming through the paint – use oil and grease remover b4 painting and beaware of touching the surface with your hands during prep and leaving an oily residue, or 2. not waiting long enough for paint to dry between coats so all the chemicals evaporating off from preveious layers are rising up causing bubbles. Thanks so much for the great blog
I need help!!! I guess im confused! I have spray painted my furniture and im looking for extra protection. Can i use a oil base and or a water based polyurethane .. does it matter? And do they come in a spray can?
This is so awesome! Thank you! I have a question, and if it has already been answered I apologize. I was wanting to spray paint a metal filing cabinet. Do you have any tips on how to ensure the paint sticks, or can I just go a head and clean it, prime it and paint it?
Thanks!
I was curious if you could tell me if I have to do any extra preparation for spraying a metal filing cabinet to ensure it adheres? Or is it as simple as cleaning, priming and painting (with paint meant for metal)?
Thanks!!!
Awesome post!!! Thanks so much!!!!
great tips thanks for sharing
What's your feelings on the spray paint that's both a primer and the paint in one can? Tried it? Like it? Hate it?
Spray paint can change your whole world. I love to decorate and I love to constantly chg things in my house. Also love to re-purpose thrifty finds.
Great tips.
This is awesome! Thanks for sharing your tips ampnd posting tutorials!!
This is awesome! Thanks for sharing your tips & posting video tutorials!!
Thank you!
This post is fabulous!! thanks so much!!
Sharing this info on my blog!! So informative asnd has helped me tons!!
What an awesome post. I agree with you, spray paint does produce the very best finish. The only point I disagree with you is not wearing a respirator mask. MSA Safety Works 817663 Multi-Purpose Respirator on Amazon has been the best one I have found. I am a painter as well, and learned the lesson of not protecting my lungs. It caused me to gasp for breath for several months for not protecting my lungs. It felt as though I was under water, almost out of breath 18 hours a day. It was the most horrible experience of my life. Don't underestimate the chemicals you are breathing in! I look forward to reading your blog! Huge Blessings! Meranda
So I took your advice and followed it to a T. However my table top looks glossy in some sections but not others. I took my time and the rest of the project looks phenomenal. If I clear coat it will it make it more of a uniform finish?
Do you have to use spray paint formulated for plastic when spray painting plastic…the color choices are just so limited! Thanks so much!
If you will use a gray primer under the red. orange, etc. it will help with the translucence. I am not sure about the green but I have used reds, berry reds and they always tell you to use a gray undercoat…
SUCH a great post! TY for sharing! I'm in the middle of a spray paint furniture project and was looking for info and stumbled across your blog! I LOVE this! Thanks again!
I'm looking to paint a few cherry pieces white on the bottom and black on the tops. Should I use a different kind of primer for the black top and which one?
Also, do you sand pieces before you spray? My pieces have a bit of a glossy finish and are stained.
Thanks!
Danielle
I love your blog and am looking for some tips if you have time. I have a hutch that is horribly old, and has many small details. I really would love to paint it but don't exactly know where to start, the paint has chipped mostly off and it is now showing bare wood with only paint in the creases of the detail. Would it be horrible to just primer over all the old and then paint it, or do I need to sand everything down and get all the old paint off?
Thanks so much for any advise!
I dont see any answers about the veneer
I'm guessing you emailed them the answer…can you please let me know about the subject? Will it stick to veneer? Thank you so much for taking the time to read and answer my comment!! :->
I'm spray painting a hutch black. I primed it with Kilz, but now it's taking about 6 coats of the black paint to get even coverage. Do you suggest using a different primer when painting furniture black? I'm about 8 cans of black paint into the project, and I think I'll need at least 8 more. Yikes!
I did not know I had to prime or sand to spray paint furniture and did so without either. The further was a smooth surface and now I am fearful the paint will scratch off. If I put polycrylic or polyurethane over it will it prevent this from happening or do I need to do something different?
Great article & tips! Thanks so much!
I love your blog! I have it booked marked on my phone so I'm never without it. I have been spray painting furniture and nick nacks lately and I keep getting the same issue: the furniture is sticky. I prime with Kilz, use Krylon, and try to light, thin coats but many of my projects are still tacky days after. Have you, or anyone else, encountered this problem?
Thank you for these tips! I'm about to do my first spray-painting furniture project, so this is just what I need!
I started spray painting my nightstand, thanks to this informative post! Do you ever use a sealant? I'm just wondering for the future when I'll need to clean it…I don't know if wood polish or something will strip the paint. Thanks!
Hi,
I brush painted a metal chair in a shade of white (after rubbing it down with sandpaper), however, I do not like the finish now.Do I need to sand it completely? (to remove the coat of paint)and prime before this can be painted again?
Love your tips. My Mom just started this last year with spray paint. I started a crib with paint and was so upset with it. I got spray paint and did it right it turned out so good.
I'm wondering if you have any thoughts on doing spray paint on outlets. When we painted out apartment some of the light switches got painted. I wanted to maybe paint them to match the walls but the paint looks so bad. Maybe spray paint them I thought?
hi – I paint glass bottles and have been using a primer coat first then chalkboard a section, and then paint the rest. I then use a sealer over the area without the chalkboard. Do I need all those steps? With the way I am spending $$ on paint I will never recoupe my costs (I sell these at craft shows). Is there a better paint to use on glass?
Thanks
@BROKEMOMOF4
I wish I knew the answer! If I were you, I would call my local glass store and maybe see if they have some good advice! Good luck!
@Rimi
Yes… You probably should sand it off and try again. Make sure you prime it first and also that the paint you are using specifically says that it can be used for metal!
Hope this helps!
@Katie
Ugh, black is for sure a hard one to use (so is navy blue) because you do need a lot of coats for perfect coverage. I have in the past used a gray primer (Rust-oleum is a good brand) when painting black and it does seem to help lessen the amount of coats needed. Hope this helps!!
@Taylaa
I think it will be pretty hard to get in all the nooks and crannies so I would lightly sand (just to smooth everything out), then prime and paint. Good luck! I would love to see the finished project!
@TheHamp
When painting black, I recommend using a gray primer. I like Rust-oleums brand. Obviously with white, you'd use a white primer. Also with black, use a satin finish and not glossy. It seems to cover better.
I wouldn't sand them first either. I would prime them really good and THEN lightly sand with 220 to get rid of the gritty feeling. Then paint away. I'd love to see the end result!
@Jessica
Yes! I would for sure only use paint that can be used for plastic.
However, have any of you readers tried anything else that has worked? I'd also love to know!
Someone has recently asked me about this…
Dual Spray Paint
Thank you for all the spray painting tips. I can use as much help as I can get!
I agree about the Krylon. I painted a rocking chair for my daughter and love how it turned out! (I used valspar "the perfect finish" from Lowes) i also used a rustoleum Universal metallic oil rubber bronze on a gold lamp. the any surface any angle spray can was worth the extra money, i really was sad that the job was done! I am sure these products are new since the original post thanks to peeps like us! I have a wooden hope chest given to me on my 18th birthday. By Great Danes bed was next to it and obviously she suffers from restless legs syndrome! I have moved her bed, she now runs on the wall! I'm torn between painting it black and red. After reading this my trigger finger is twitchy! Ha ha! Thank you for all the great info!
I am going to spray over furniture that has polyurethane on it. Do I need to do any special prep, such as sanding, etc or is using a primer first enough?
You should make sure the surface is clean and dry. Also, it isn't a bad idea to rough up the surface a little with 220 grit sand paper first. It will help the primer stick. Good luck!
I read all your posts and did not see an answer about the project crackling. Is there a way to avoid this? And now that it has crackled how do I take the paint off and start over again? Thanks, Kelli
I had the same results as Kelli Webb! I primed the picture frames and had this random crackling in spots. Hubs said I sprayed too much paint. I said oh well, and sanded with 220 grit sand paper and sprayed again…same results! It is more prevalent with the Pewter color than the white. Plus when I sanded the piece, the paint just peels off…even primed, the paint seemed not to adhere.
how should you store spray paint? It's in my garage which goes below freezing. Is that ok?
I am new to spray painting. I found a great cut-glass (might be crystal, can't tell) lamp base at the Habitat Re-Store that I want to paint. I know I need to prime and paint, but do I need to seal it after if it's glass? In case you need to know, I plan to paint the lamp a glossy white.
I am new to spray painting. I found a great cut glass (might be crystal, I can't tell) lamp base at the Habitat Re-Store. I know I need to prime and paint, but do I need to seal it after if it's glass? In case you need to know, I plan to paint the lamp base a glossy white.
Hey can i spray paint a ceramic vase? like yourself i hate waiting for paint to dry
can i spray paint a ceramic vase?
I spray everything… This was very helpful. Ill be trying Krylon from now on. I've never used a primer, and I buy the cheap stuff. Still comes out great! Taking your advice now though… =)
It is way too cold outside right now for me to paint in my garage. If I'm lucky I should be able to do it sometime in April. I have a few things that I really want to finish. Is it safe to spray paint in my unfinished basement? There is a door at the top of the stairs but I'm sure some fumes can get through. Do you think it would be OK or do I just need to wait until spring?
@pmaynes I sometimes spray in my garage but you for sure have to wait a little longer in between coats and let the room air out. I would for sure use caution and your best judgement. Maybe start with something small and see how that goes. I'm totally not saying "Yes, it's ok", I'm just saying be careful. Ha! I'm totally impatient and want to get stuff done right away too so it would also be hard for me to wait. Good luck!
You are a true diva when it comes to do anything with painting. So generous in sharing your hard-earned knowledge for the benefit of others. You deserve a medal. There's another blogger who I admire for selflessly sharing information – the graphic fairy. More power to you both. The world is reading your blog and greatly benefitted by it. Thank you.
I have a large black square coffee table I want to redo with cream and antiquing. This whole spray paint idea really appeals haha! soo I’m thinking sanding at least the top down, prime the whole thing, then spray paint antique white. How would I go about distressing some of the edges? Any tips? Thanks so much!!!!
I would definitely look at my glazing posts! That is how I distress everything!!
Thanks so much for this! I found this through Pinterest… I’ve recently become very interested in fixing up furniture for my new house. I have not done so yet, since I have not yet moved in, but when I do I will need to buy inexpensively. Reading this has made me more excited than I was before about revamping furniture. Very helpful!
Hi there,
Firstly, let me say that I found this whole post VERY helpful, I have neglected painting all kinds of things because of the time it takes to sand/prime etc. So the every spray tip including priming is great.
I was wondering – since you seem to be a bit of an expert – do you know if painting laminate furniture can be done in the same way (spray prime, then spray paint)? Do you have any tips specifically for this?
Thanks!
Yes, you can spray laminate furniture the same way. Just make sure that you use KILZ primer. It makes a difference in brand. Good luck!
Love, love all your tips and tidbits! My husband grew up remodeling homes and isn’t convinced about spray painting, but I’m hoping to convince him
Quick question: I have a gallon of kilz and was wondering if I’ll get the same quality paint job with this as I would with the spray version. Any ideas? My plan is to roll it on, sand with 220 grit, spray it white, and then antique with black-tinted glaze.
I have never done it that way, so it’s uncharted territory in my eyes. So, if you do it, please report back so that we can learn from your experience. I avoid rolling and brushing on paint like the plague because I loath brush marks. But, I recognize that is just my opinion and others may not mind them at all.
Question so can I do the rustic look with spray paint?
The way to make it look rustic is through glazing. http://www.allthingsthrifty.com/2010/03/glazing-furniture-101.html
i have spay painted flower pots and now i want to decorate them. what type of paint can I use. not to fully paint over but to add too, like strips or flowers. I cant find this anwser anywhere!
I have never done this but I’m guessing that craft paint would work.
Can I use gloss spray paint on regular printing paper to add a shine or seal it over a DIY cardboard project I am making?
If you are careful not to over saturate the paper then yes you can spray paint it. I’ve only sprayed cardstock before and it worked great!
Awesome! Have you used the spray poly? What’s your opinion on it? Thank you!
Every time I use spray poly I am disappointed with the result. It ends up looking stripey. So I brush it on 9 times out of 10.
I am started a project and i am going to spray paint it brown and put spray paint yellow letters on it, do you think the yellow will show up?
Yes as long as you do enough coats it will. Good luck!
Yes the yellow will cover the brown if you do enough coats.
I stumbled across your blog while scouring the web for the answer to my question… and still am in need of help. I have 2 projects underway, the first is spray painting black letters to be a nice chocolate brown… do I need to primer them with white (which is what I already have for my 2nd project) first before going from black to brown? Or will the brown just show up if I do it straight on the black? Or do I buy another primer color to do under the brown? (I have krylon spray paint) – I tend to ask A LOT of questions, but need help with this since I am beginning a DIY journey for our home.
Also, 2nd project is turning black bookshelves to white. If I spray paint white primer then do a white semi-gloss, will this give the desired white paint look? Or will I need to sand it?
Thanks in advance!!
For a small project like your letters, I would use a product with primer already in the spray paint. Krylon Dual works great for this. I would also suggest to use satin sheen so that they aren’t overly glossy, unless that is what you want.
With your bookshelves, yes you need to prime them. In fact, I would do at least 2 coats of primer so that mostly all of the black is covered up before you start painting. After you have primed the shelves, sand off the gritty texture with 220 grit sand paper and then begin painting. You will need a lot of paint to go from black to white just an FYI. Good luck!
I have been looking for a pink color of spraypaint but all of the ones I find are bubble gum or neon. The picture at the top of this page has some pink paints that would work for what I am trying to do. do you know what brand those are and where I can get them? also if you do know what they are can they be used on metal? thank you
Have you looked at Krylon Watermelon or Krylon ballet slipper? I’m not sure what color of pink you are looking for, but I use those two colors all the time. They carry Krylon at Walmart.
OK, so I’m totally on board with you about using spray paint instead of painting for real (and my father gets on me all the time about painting wood, I tell him I only paint “ugly” wood!) Anyway, you mentioned that you like the dry time of 10 minutes in between coats and I completely relate….but my question is how long do you actually wait in order to functionally use an item? With most paints I have found that it has a cure date of at least 30 days…egads I REALLY don’t have the patience for that…so I start “using” stuff after just a couple days but try to take it easy on that item for the first month. What has been your experience with spray paint? There’s nothing quite so horrible as a sticky paint job!!! Thanks….
I’m impatient and start using the item the next day!
it has been totally fine for me!
Don’t know the source of that pic but the spray paint is Montana Gold.
I’ve been doing spray paint space art for a weeks now, but for some reason the colored spray paint below the black is starting to seep through to the top of the painting and come through all the black, anyone know why? It has never done this before
Hi Francie,
Send me a picture to allthingsthriftyassistant at gmail dot com, so I can see what you are talking about. I will try and help you!
Can use spray paint if you want to give your furniture a destressed look?
Hi Crysal,
Yep you sure can! Just sand it off in spots to create that look, or you can glaze it too. Good luck!
Awesome tips Brooke. Thank you
Hi! If I am spray painting something that original black to a mambo pink krylon, what color of primer should I use?
Use Kilz white original primer. Good luck!